Powerbuilt Heavy Duty Tie Rod and Ball Joint Separator – 940425

Feature:
-Heavy duty metal tool separates tie rod end ball joints on most compact cars
-Separates stubborn joints without damaging grease reservoirs.
-For use with hand tool only.
Usage Step:
1. For the tie-rod and ball joint applications, remove the cotter pin using a pair of long-nose pliers.
2. Remove the retaining nut from tie rod or ball joint stud.
2. Position the puller tool so that the center screw pressed on the end of the tie rod or ball joint stud. The jaws of the pullers should be force between the boot on the tie rod or ball joint. Tighten the puller center screw with a wrench until the parts have been separated.